How Pneumatic works and the elements on that

When you works in manufacturing industry, you will see machine that shown like this :

originally posted by : fauzan ghifari | 112110104 | deliveryypt founder |

Its called pneumatic
so, here i want to explain you about how pneumatic works,
and here is the step :
1. Turn on the compressor, using starting motor usually electrical motor
2. The air sniff in to the compressor, and then it pressed until it reach the certain bar.
3. Then the air flows to the pneumatic circuit, filter, regulator, and lubricator
4. And then the air flow distributed by opening the valve at service unit.
5. It press the valve button.
6. So the air flowing to the pneumatic tube.
7. and.. the result is piston moving forward.

and here i give you the elements that include to the pneumatic :
1. Air Compressor
    Its tools to produce the energy for the pneumatic. (stopped air)
2. Air service unit
    In here there are 3 kind process :
   1. Air Filter
   2. Air Regulator
   3. Air Lubricator
3. Referigerated Dryer
   Its used to decreasing the air temperature to decreasing the air womb.
4. Distributor andReceiver
   Distributing each work station
5. Valve
   There are 4 kinds of valve :
    1. Directional Control Valve
    2. Non return Valve
    3. Flow control Valve
    4. Pressure Valve

And here is the example of pneumatic

originally posted by : fauzan ghifari | 112110104 | deliveryypt founder |